Controlled Environment
September 2023
-
Where is CE available?
CE is available in select counties in Alabama, California, Colorado, Delaware, Florida, Hawaii, Iowa, Kentucky, Maine, Maryland, Michigan, Minnesota, New Jersey, New York, North Carolina, Ohio, Oregon, Pennsylvania, Tennessee, Texas, Virginia, Utah, Washington, West Virginia, and Wisconsin.
State County State County State County State County Alabama
Autauga
Florida
Levy
Michigan
Monroe Pennsylvania
Chester Alabama
Baldwin
Florida
Manatee
Michigan
Muskegon Pennsylvania
Lancaster Alabama
Mobile
Florida
Marion
Michigan
Ottawa Tennessee
Cannon California
San Bernardino
Florida
Martin
Michigan
Washtenaw Tennessee
Coffee California
Santa Barbara
Florida
Miami-Dade
Michigan
Wayne Tennessee
De Kalb Colorado
Adams Florida
Okeechobee
Minnesota
Dakota Tennessee
Franklin Colorado
Arapahoe
Florida
Orange
Minnesota
Hennepin Tennessee
Grundy Colorado
Douglas Florida
Palm Beach
Minnesota
Ramsey Tennessee
Warren Colorado
Larimer
Florida
Pasco
Minnesota
Steele Texas
Brazoria Colorado
Weld Florida
Polk
Minnesota
Washington Texas
Fannin Delaware New Castle
Florida
Santa Rosa
New York
Erie Texas
Harris Florida
Alachua
Florida
Sarasota
New York
Suffolk Texas
Henderson Florida
Broward
Florida
Seminole
New Jersey
Atlantic Texas
Jeff Davis Florida
Calhoun
Florida
St Lucie
New Jersey
Cape May Texas
Presidio Florida
Charlotte
Florida
Sumter
New Jersey
Cumberland Texas
Smith Florida
Citrus
Florida
Suwannee
New Jersey
Gloucester Texas
Van Zandt Florida
Collier
Florida
Volusia
North Carolina
Buncombe Texas
Waller Florida
Columbia
Hawaii
Hawaii
Ohio
Cuyahoga Texas
Ward Florida
De Soto
Iowa
Cerro Gordo
Ohio
Erie Texas
Wharton Florida
Escambia
Iowa Howard Ohio
Franklin Texas
Wood Florida
Flagler
Kentucky
Madison
Ohio
Fulton Utah
Juab Florida
Gadsden
Kentucky
Pulaski Ohio
Lake Virginia
Fauquier Florida Glades
Kentucky
Rowan
Ohio
Lorain Virginia
Rockingham Florida
Hardy
Maine
Somerset
Ohio
Lucas Washington
Benton Florida
Henry
Maryland
Cecil Oregon
Clackamas Washington
Franklin Florida
Highlands
Michigan
Allegan
Oregon
Linn Washington
Grant Florida
Hillsborough
Michigan
Berrien Oregon
Marion Washington
Yakima Florida
Jefferson
Michigan
Branch Oregon
Multnomah West Virginia
Mercer Florida
Lafayette
Michigan
Genesee Oregon
Polk West Virginia
Upshur Florida
Lake
Michigan
Kalamazoo Oregon
Washington Wisconsin
Kenosha Florida
Lee
Michigan
Kent Oregon
Yamhill Wisconsin
Washington Florida
Leon
Michigan
Macomb Pennsylvania
Berks -
What is a controlled environment?
A controlled environment is a technology-based approach to production that:
- Uses fully-enclosed structures throughout the entirety of the crop year to produce specific crops with the aim of providing protection and maintaining optimal growing conditions throughout the development of the plants; and
- Grows plants and derives at least 40 percent of its gross income from the wholesale marketing of such plants.
-
Can I insure a specific plant under CE and Nursery Value Select (NVS) or Nursery Field Grown and Container (FG&C) for the same crop year in the same county?
Yes. You may insure a specific plant under a CE policy and under a Nursery Value Select or Nursery (Field Grown & Container) policy, unless restricted by the Special Provisions. However, the policies must be insured with the same insurance company and you cannot receive an indemnity on the same specific plant under more than one policy. -
What documentation do I need to provide to my crop insurance agent to obtain CE insurance?
You must submit the following:
- Crop insurance application;
- Controlled Environment Value Report (CEVR) for each insured plant production practice.
- The CEVR is a document that represents your declaration of the insurance choices you elect.
- Monthly Unit Value Report (MUVP) for each insured basic unit.
- The MUVP is a document that represents your declaration for each basic unit by:
- Month, from the first month to the last month of the insurance period; and
- By the maximum value of all specific plants in each insured plant category that you expect to have in your nursery (during each month of the insurance period.)
- The MUVP is a document that represents your declaration for each basic unit by:
- Submit two printed copies or one electronic copy of the most recent catalog or price list, by season or plant category, if appropriate.
- A copy of your biosecurity self-certification.
All documents must be acceptable and must be submitted on or before the sales closing date, except the MUVP*, for insurance to attach on the first day of the insurance period.
*If you are a carryover insured, you may certify on your CEVR in subsequent years that there were no material changes to your previously submitted MUVP and, therefore, an updated MUVP would not be required to be submitted.
-
What is the deadline to submit the required documentation?
For insurance to attach on the start date of the crop year, all documentation must be submitted on or before the sales closing date for your county.
- For new and first-year insureds, if you’re applying for coverage after the sales closing date:
- Insurance does not attach until the 31st day (30-day waiting period) after acceptable documents are filed; and
- Premium is owed from the first day of the month insurance attaches until the end of the insurance period.
- For carryover insureds, all documentation must be submitted on or before the sales closing date to have coverage for the upcoming crop year.
- For new and first-year insureds, if you’re applying for coverage after the sales closing date:
-
What unit structures are available under CE?
Basic units are the only unit structure available under CE. For catastrophic level of coverage, a basic unit consists of the following:
- All insurable plants and all insurable plant categories in each plant production practice that you elect to insure.
For additional levels of coverage, a basic unit consists of the following:
- All insurable plants in each plant category you elect to insure under each insured plant production practice.
An administrative fee is due for each insured plant category if additional coverage is elected, and for each insured plant production practice if CAT coverage is elected.
-
Must I insure all my plants under CE?
No. Whether you have the catastrophic level of coverage or additional levels of coverage, CE allows you to insure one or more plant production practices. Moreover, for additional levels of coverage only, CE allows you to choose which plant categories within the insured plant production practice you wish to insure. The plant categories may be insured at different coverage levels. Once you have selected the plant categories you wish to insure, all plants within those plant categories must be insured. -
What is the insured crop?
The insured crop will be all specific plants grown in a CE within each insured plant production practice for CAT level of coverage, and each plant category you choose to insure within each insured plant production practice for additional level of coverage and that:
- You have an insurable share;
- Are specific plants determined by the approved insurance provider (AIP) to be acceptable;
- Are grown in a county for which a premium rate is provided in the actuarial documents;
- Are grown in a CE determined by the AIP to be acceptable;
- Are irrigated unless otherwise provided by the Special Provisions (you must have adequate irrigation equipment and water to irrigate all insurable plants at the time coverage attaches and throughout the insurance period);
- Are grown in accordance with the plant production practices for which premium rates have been established;
- Are grown in an appropriate medium;
- Are not grown solely as stock plants;
- May produce edible fruits, nuts, buds, flowers, or greenery for sale; and
- Are not any plant classified by a state or county as illegal to grow or sell in the county in which the CE is located. For example, growing or selling plants classified as invasive species is illegal in many states and counties. No indemnity will be paid on any such plant.
-
How is my amount of insurance determined?
Amount of insurance is calculated by multiplying the coverage level you elect by the Selected Value (SV). The SV is the value you declare on your CEVR of the insurable specific plants in each insured plant category.
- For additional coverage:
- The SV may not exceed the highest maximum value for the same plant category reported on your MUVP; and
- You may be required at time of inspection to provide inventory records or comprehensive business plan to support the maximum values reported.
- For CAT coverage, your SV for each insured plant production practice cannot exceed the lesser of:
- 110 percent of the maximum value for all the plant categories in any given month during any of the preceding three crop years; or
- The maximum of the monthly values reported on the MUVP. At the time of an inspection or at any time upon our request, you must provide inventory records to support the monthly values reported.
- For additional coverage:
-
What are the insurable causes of loss?
Insurance is provided for unavoidable damage caused only by the unknown introduction of a plant disease or contamination into the CE at no fault of the CE operator resulting in a destruction order that requires destruction of the plants.
-
What information do I need to provide if I have a loss?
If you have a loss, you must:
- First protect the plants from further damage by providing sufficient care;
- Then notify your insurance company within 72 hours of initial discovery of damage (but not later than 15 days after the end of the insurance period); and
- Cooperate with the insurance company in the settlement of claim.
To complete a settlement of claim, the insurance company will need the following information:
- Documentation that supports your CEVR and inventory immediately prior to the loss occurrence.
- Required documentation includes, but is not limited to, the following:
- A detailed listing that includes the full name of each specific plant;
- Acceptable sales records for any specific plants that were sold the previous 60 days or 12 months, as applicable, that support the determination of approved sales value for each specific plant as described in section 1 of the CE Crop Provisions; and
- Documentation or demonstrated performance of your ability to properly obtain specific plants and carry out good production practices related to the maintenance of the specific plants.
- Required documentation includes, but is not limited to, the following:
- A copy of the destruction order.
- If requested, you must provide:
- Your most recent inventory; and
- Purchase and verifiable sales records from the date of your most recent inventory to the date of loss occurrence.
-
How are losses determined?
To determine the loss, the loss adjuster needs to know the pre-loss actual unit value and the post-loss damage value.
- The pre-loss actual unit value is the total dollar value of all insurable specific plants in a basic unit, immediately prior to the occurrence of the loss event, determined by multiplying the approved sales value by the number of each specific plant and summing the results.
- The post-loss damage value is the total dollar value lost in a basic unit due to an insured cause of loss determined in section 12 of the CE Crop Provisions using Federal Crop Insurance Corporation approved procedures and the damage factors contained in the Special Provisions.
Once the loss adjuster knows those two values, the loss adjuster determines the percent of loss by dividing the post-loss damage value by the pre-loss actual unit value.
The percent of loss is then multiplied by the coverage percentage and lesser of the pre-loss actual unit value or the SV to arrive at the value of the loss.
The indemnity is then calculated by multiplying loss by your price election percentage and share.
The total of all indemnities paid for the crop year will not exceed the amount of insurance.
-
How and where do I purchase CE insurance?
CE is available for purchase from your local crop insurance agent. You can find a crop insurance agent at the following link on the Risk Management Agency (RMA) website: www.rma.usda.gov/Information-Tools/Agent-Locator page.
These agents work for insurance companies that have reinsurance agreements with the RMA.